Dell PowerConnect B-DCX-4S Backbone Replacement Procedure - Page 3

Browse online or download pdf Replacement Procedure for Switch Dell PowerConnect B-DCX-4S Backbone. Dell PowerConnect B-DCX-4S Backbone 6 pages. Power supply and filler panel
Also for Dell PowerConnect B-DCX-4S Backbone: Replacement Procedure (16 pages)

Print Page

In this guide

•

Power supply installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

•

Time and items required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

•
Removing a power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
•
Replacing a power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Power supply installation
Use this procedure to remove and replace a power supply.
NOTE
The PowerConnect B-DCX can continue operating during the replacement if:
At least one 220 VAC power supply is operating,
At least two 110 VAC power supplies are working.
The PowerConnect B-DCX-4S can continue operating during the replacement if the second 220 VAC power supply is
operating,
Time and items required
The replacement procedure for each power supply takes less than 5 minutes. A power supply unit or filler panel is
required for the power supply replacement.
Figure 1
shows the location and identification of the power supplies for the PowerConnect B-DCX.
1
Power supply 1 (PS1)
2
Power supply 2 (PS2)
FIGURE 1
Power supply identification for the PowerConnect B-DCX
Power Supply and Filler Panel Replacement Procedure
53-1001794-01
3
Power supply 3 (PS3)
4
Power supply 4 (PS4)
3