Dell PowerConnect M8428-k Manual - Page 13

Browse online or download pdf Manual for Switch Dell PowerConnect M8428-k. Dell PowerConnect M8428-k 25 pages. Dell poweredge m710 and m710hd - system memory update
Also for Dell PowerConnect M8428-k: Update Manual (32 pages), Release Notes (27 pages), User Manual (23 pages), Update Manual (1 pages)

Print Page

Command Line Interface (CLI) Reference

10GbE PTM management is done via the 10GbE PTM CLI. You can use the commands described

in this section after successfully connecting to the 10GbE PTM CLI according to the procedure

Section 2, "Connecting to the 10GbE PTM CLI," on page 9

described in

3.1

CLI Privilege Levels

The 10GbE PTM supports the following user privilege levels:

• USER - Common user level, indicated by the # prompt

• ADMIN - Administrator level, indicated by the & prompt

Different commands are available in different privilege levels. The command reference indicates

the required privilege level for each command that requires a privilege level higher than USER.

3.2

Quick Reference

Table 5 provides a quick reference to the CLI commands:

Table 5 - List of Commands

Command

name

General Commands

help

exit

reload

Software Image Commands

show image ver

copy image from-

file

Device Commands

show device temp Shows the temperature of a specified device

Port Commands

Short Description

Shows the list of available commands

Change privilege level

Exit current privilege level

Restart the module:

Hardware reset and software reload

Shows the software image version

Upload new software image to the PTM

Reference

Section 3.4.1, "help," on page 14

Section 3.4.2, "login (ADMIN)," on

page 15

Section 3.4.3, "exit," on page 15

Section 3.4.4, "reload," on page 15

Section 3.5.1, "show image ver," on

page 16

Section 3.5.2, "copy image from-file,"

on page 16

Section 3.6.1, "show device temp

(ADMIN)," on page 17

Rev 1.00