Dell PowerConnect PC7048R-RA Stacking Instructions - Page 34
Browse online or download pdf Stacking Instructions for Switch Dell PowerConnect PC7048R-RA. Dell PowerConnect PC7048R-RA 37 pages. Stacking gigabit ethernet switches
Also for Dell PowerConnect PC7048R-RA: Technical White Paper (34 pages)
Print Page
Stacking Dell PowerConnect 7000 Series Switches
Small Configuration
6 switches stacked
4 VLANs, all ports are members of all VLANs
2/2 static/dynamic lags with 8 members each
1 MSTP instance with VLANs
15 ACLs applied on 15 interfaces
5 Diffserv service interfaces with policies on 5 interfaces
2 VLAN routing interfaces
16 L2 Multicast group entries
256 ARP entries
16 Unicast routes
Parameter
L2 loss duration (non-failed or rerouted stack member)
L2 loss duration (failed/rerouted stack member)
L3 loss duration (failed/rerouted stack member)
IPMC loss duration (failed/rerouted stack member)
L2 convergence time
L3 convergence time
IPMC convergence time
Total convergence time
Stacking CLI Commands
The following stacking commands are available from the CLI. See the CLI Reference Guide for more
detailed information about the commands.
boot auto-copy-sw
clear checkpoint statistics
initiate failover
member
movemanagement
nsf
set description
show checkpoint statistics
show nsf
Timing
0 msec
10 msec
12 msec
12 msec
14.770 sec
14.800 sec
17.540 sec
17.540 sec
show stack-standby
show switch stack-ports
show switch stack-ports counters
show switch stack-ports diag
show supported switchtype
show switch
stack-port
switch renumber
Page 32