Dell PowerEdge M520 User Manual - Page 24

Browse online or download pdf User Manual for Switch Dell PowerEdge M520. Dell PowerEdge M520 26 pages. Dell poweredge blade servers getting started guide
Also for Dell PowerEdge M520: Information Update (38 pages), Release Notes (27 pages), Manual (25 pages), User Manual (23 pages), Important Information Manual (35 pages), Update Manual (32 pages), Update Manual (28 pages), User Manual (22 pages), Getting Started Manual (12 pages), Technical Manual (46 pages), Technical Manual (45 pages), Portfolio Manual (27 pages), Getting Started Manual (14 pages), Getting Started Manual (12 pages)

Dell PowerEdge M520 User Manual
Rev 1.00
# exit
Step 5. Power cycle the 10GbE PTM for the firmware to take effect. From the CMC command
line type the following command:
$ racadm chassisaction -m switch-<n> powercycle
Step 6. Wait for 20 seconds, and then connect to the 10GbE PTM. Run:
$ connect switch-<n>
Step 7. Login to the 10GbE PTM command line interface as admin. Run:
# login admin
Step 8. To confirm that all three PhyX chips have the same firmware version, run the command:
& show image ver
Software image version: 1.0.28-201005131448-62
Component #1 FW version: 8.2.958
Component #2 FW version: 8.2.958
Component #3 FW version: 8.2.958
&

4.3.2 Updating Firmware for a Single PhyX Device

Step 1. Connect to the 10GbE PTM. Run:
$ Connect switch-<n>
Where n is the number of the switch, 2 in our example.
Step 2. To start the upgrade process for a single PhyX device (1,2, or 3), run the command:
# copy image from-file [device number]
The system is now waiting for the file to be transferred from the SSH client.
To complete the procedure, please follow Step 3 through Step 8 as described in
24
Software User's Manual
Section 4.3.1
above.