Allied Telesis AT-8400 Series Installation Manual

Browse online or download pdf Installation Manual for Power Supply Allied Telesis AT-8400 Series. Allied Telesis AT-8400 Series 2 pages. Line card and power supply blank faceplate
Also for Allied Telesis AT-8400 Series: Installation Manual (2 pages)

Print Page

Allied Telesis AT-8400 Series Installation Manual

Electrical Safety and Emission Statement

Standards: This product when meets the following standards when installed in compliant host

equipment:.

U.S. Federal Communications Commission

RADIATED ENERGY

Note: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant

to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed and used in accordance with this instruction

manual, may cause harmful interference to radio communications. Operation of this equipment in a residential

area is likely to cause harmful interference in which case the user will be required to correct the interference at

his own expense.

Note: Modifications or changes not expressly approved of by the manufacturer or the FCC, can void your right

to operate this equipment.

Industry Canada

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment

Regulations.

Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du

Canada.

Emission

FCC Class A, EN55022 Class A, VCCI Class A, C-TICK

WARNING:

In a domestic environment this product may cause radio interference in which case the user

may be required to take adequate measures.

Immunity

EN55024

Electrical Safety EN60825, EN60950 (TUV), UL60950 (UL/cUL)

AT-8400 Fan Replacement

Installation Guide

For use with the AT-8400 Chassis

Overview

The AT-8403 fan is designed for an AT-8400 Chassis. See the illustration

below. For proper operation, ATI requires two AT-8403 fans-- one in the Fan A

slot and another in the Fan B slot. Both slots are located at the rear of the AT-

8400 Chassis. In addition, both fans are field replaceable. This quick

installation guide provides instructions for replacing the fans.