Dell PowerEdge M620 User Manual - Page 17

Browse online or download pdf User Manual for Switch Dell PowerEdge M620. Dell PowerEdge M620 26 pages. Dell poweredge blade servers getting started guide
Also for Dell PowerEdge M620: Information Update (38 pages), Release Notes (27 pages), Manual (25 pages), User Manual (23 pages), Important Information Manual (35 pages), Update Manual (32 pages), Update Manual (28 pages), User Manual (22 pages), Getting Started Manual (12 pages), Getting Started Manual (12 pages), Technical Manual (46 pages), Technical Manual (49 pages), Portfolio Manual (27 pages), Technical Manual (44 pages), Getting Started Manual (14 pages), Getting Started Manual (12 pages)

Dell PowerEdge M620 User Manual
Dell 10Gb Ethernet Pass Through II
11
#
# show port link 7
Port
--------------------------------------------------------
7
#
3.7.2
show port module
Synopsis:
show port module port_number
Description:
Show the transceiver module information for the specified uplink port.
Example:
# show port module 1
Status......................................... OK
Gigabit Ethernet Compliance Codes.............. 10GBASE-SR
Vendor Name.................................... FINISAR CORP.
Vendor Part Number............................. FTLX8571D3BCL-ME
Vendor Serial Number........................... UDD01@A
Vendor Revision Number......................... A
#
3.8

Debug Commands

3.8.1
cr_read (ADMIN)
Synopsis:
cr_read device_number 0xaddress
Description:
Read an internal PhyX device register. This command accepts the following parameters:
>device_number – the device from which to read a register (1..3)
>address – the register memory location from which to read (32-bit address)
Example:
& cr_read 2 0xf0014
0x000f0014:0x00a217d4
B
10G
Group
Connect
A
down
10G
SFP SX
Downlink
Uplink
down
SFP+ SR
Rev 1.00
17