Dell PowerEdge M820 Systems User Manual - Page 24

Browse online or download pdf User Manual for Switch Dell PowerEdge M820 Systems. Dell PowerEdge M820 Systems 26 pages. Dell poweredge blade servers getting started guide
Also for Dell PowerEdge M820 Systems: Information Update (38 pages), Release Notes (27 pages), User Manual (23 pages), Important Information Manual (35 pages), Update Manual (32 pages), Update Manual (28 pages), User Manual (22 pages), Getting Started Manual (12 pages), Owner's Manual (3 pages), Technical Manual (46 pages), Portfolio Manual (27 pages), Getting Started Manual (14 pages), Getting Started Manual (12 pages), Technical Manual (47 pages)

Print Page

Rev 1.00

# exit

Step 5. Power cycle the 10GbE PTM for the firmware to take effect. From the CMC command

line type the following command:

$ racadm chassisaction -m switch-<n> powercycle

Step 6. Wait for 20 seconds, and then connect to the 10GbE PTM. Run:

$ connect switch-<n>

Step 7. Login to the 10GbE PTM command line interface as admin. Run:

# login admin

Step 8. To confirm that all three PhyX chips have the same firmware version, run the command:

& show image ver

Software image version: 1.0.28-201005131448-62

Component #1 FW version: 8.2.958

Component #2 FW version: 8.2.958

Component #3 FW version: 8.2.958

4.3.2 Updating Firmware for a Single PhyX Device

Step 1. Connect to the 10GbE PTM. Run:

$ Connect switch-<n>

Where n is the number of the switch, 2 in our example.

Step 2. To start the upgrade process for a single PhyX device (1,2, or 3), run the command:

# copy image from-file [device number]

The system is now waiting for the file to be transferred from the SSH client.

To complete the procedure, please follow Step 3 through Step 8 as described in

Software User's Manual

Section 4.3.1

above.