Dell PowerEdge M910 Technical Manual - Page 28

Browse online or download pdf Technical Manual for Switch Dell PowerEdge M910. Dell PowerEdge M910 46 pages. M-series blade servers
Also for Dell PowerEdge M910: Update Manual (44 pages), Update Manual (21 pages), Update Manual (14 pages), Installation Manual (7 pages), Update Manual (28 pages), Getting Started Manual (12 pages), Getting Started Manual (12 pages), Portfolio Manual (27 pages), Technical Manual (45 pages), Getting Started Manual (14 pages), Getting Started Manual (12 pages), Technical Manual (49 pages)

Print Page
Dell PowerEdge M910 Technical Manual
Dell
9

BIOS

9.1 Overview

The PowerEdge M910 BIOS is based on the Dell BIOS core, and supports the following features:
•
IA‐32 Intel Xeon 7510 chipset 4S
•
Simultaneous Multi‐Threading (SMT)
•
CPU Turbo Mode
•
PCI 2.3
•
Plug-and-play 1.0a
•
MP (Multiprocessor) 1.4
•
Boot from hard drive, optical drive, iSCSI drive, USB key, and SD card
•
ACPI
•
Direct Media Interface (DMI)
•
PXE and WOL support for on‐board NICs
•
Memory mirroring and sparing
•
SETUP access through <F2> key at end of POST
•
USB 2.0 (USB boot code is 1.1 compliant)
•
F1/F2 error logging in CMOS
•
Virtual KVM, CD
•
UEFI (Unified Extensible Firmware Interface) 2.1 support
The PowerEdge M910 BIOS does not support the following:
•
Embedded Diagnostics
•
BIOS language localization
•
BIOS recovery after bad flash (but can be recovered from iDRAC6 Enterprise)

9.2 Supported ACPI States

The PowerEdge M910 supports the standard ACPI states. See http://www.acpi.info/for more
information.
PowerEdge M910 Technical Guide
28