Dell PowerVault 56F User Manual - Page 26
Browse online or download pdf User Manual for Switch Dell PowerVault 56F. Dell PowerVault 56F 42 pages. Dell powervault 56f switches rack installation guide
Also for Dell PowerVault 56F: User Manual (6 pages), Connection Manual (38 pages), Install Manual (8 pages), Rack Installation Manual (28 pages)
Print Page
2-16
Dell PowerVault Switch Manager User's Guide
LED status indicator
icon
WWN field
Domain ID field
Role field
State field
Firmware field
Ether IP field
Ether NM field
FC IP field
FC NM field
Gateway field
No light — No device attached
Steady yellow — Receiving light, but not online;
(check cable connections)
Slow yellow — Disabled (diagnostics or
portDisable command)
Fast yellow — Error, fault with port
Steady green — Online (connected with a device
by cable)
Slow green — Online but segmented (loopback
cable or incompatible switch)
Fast green — Internal loopback (diagnostic)
Flickering green — Online and transmitting and
receiving frames
Unique permanent numeric identifier for each switch;
assigned by the manufacturer.
Number that uniquely identifies the switch in a fabric
Principal — Principal switch as defined in FC_SW
protocol
Subordinate — Switch enabled, but not as the
principal switch
Disabled — Switch disabled
Switch state:
Online
Offline
Testing
Faulty
Firmware version
Ethernet IP address
Ethernet netmask value
Fibre Channel IP address
Fibre Channel netmask value
IP address of the default gateway; must be properly set
to access the switch from other networks