Dell S4048-ON Configuration Manual - Page 9

Browse online or download pdf Configuration Manual for Switch Dell S4048-ON. Dell S4048-ON 19 pages. Enterprise switches
Also for Dell S4048-ON: Configuration Manual (30 pages), Troubleshooting Manual (29 pages)

Print Page
Dell S4048-ON Configuration Manual
2.4

Configure route for OOB management port (optional)

Dell(conf)#management route X.Y.Z.0 /24 A.B.C.1
X.Y.Z.0
Note:
the switch. If your management system is on the same subnet as the switch, the previous step may be
omitted. The previous example assumes a class C subnet mask.
2.5

Configure login credentials

Dell(conf)#username admin privilege 15 password 0 yourpassword
Dell(conf)#enable password level 15 0 yourpassword
2.6

Enable switch ports

Option 1: Enable ports individually by entering the port number.
Dell(conf)#interface tengigabitethernet 1/1
Dell(conf-if-te-1/1)#switchport
Dell(conf-if-te-1/1)#no shutdown
Dell(conf-if-te-1/1)#exit
Dell(conf)#exit
Option 2: Enable multiple ports at once using the 'range' parameter.
Dell#configure
Dell(conf)#interface range tengigabitethernet 1/1–1/48
Dell(conf -if-range-te-1/1-48)#switchport
Dell(conf -if-range-te-1/1-48)#no shutdown
Dell(conf -if-range-te-1/1-48)#exit
Dell(conf)#exit
2.7

Enable Jumbo Frames

Dell#configure
Dell(conf)# interface range tengigabitethernet 1/1–48
Dell(conf -if-range-te-1/1-48)#mtu 12000
2.8

Configure flow control

Dell(conf -if-range-te-1/1-48)#flowcontrol rx on tx off
9
SCG1026
Dell Networking S4048-ON Switch Configuration Guide for PS Series SANs
is the network your management system is connecting from and
A.B.C.1
is the gateway for