Dell S4100-ON Series Installation Manual - Page 12
Browse online or download pdf Installation Manual for Switch Dell S4100-ON Series. Dell S4100-ON Series 47 pages.
Also for Dell S4100-ON Series: Setup Manual (21 pages), Installation Manual (48 pages), Installation Manual (49 pages)
Print Page
LED
7-Segment LED for stacking
Table 4. System management Ethernet port LEDs
LED
Link LED
Activity LED
Table 5. SFP+ port LEDs
LED
Link LED
Activity LED
NOTE:
There are four LEDs for each QSFP+ and QSFP28 port. For each port, 100 GbE or 40 GbE uses only one LED, 2x50 GbE
uses two LEDs, and 4x25 GbE or 4x10 GbE uses all four LEDs.
Table 6. QSFP28 port LEDs
LED
Link/Activity LED
12
S4100–ON Series switch
Description
•
Blinking blue—Locator function is enabled
•
Off—No power
•
Solid green—Hex digit representing the stack unit ID
Description
•
Off—No link
•
Solid green—Link operating at a maximum speed—
autonegotiated/forced or 1G port
•
Solid yellow—Link operating at a lower speed—
autonegotiated/forced or 10/100M port
•
Off—No link
•
Flashing green—Port activity
Description
•
Off—No link
•
Solid green—Link operating at maximum speed—10G port
•
Solid yellow—Link operating at a lower speed—1G port
•
Flashing yellow, 1 second on/off—Port beacon
•
Off—No link
•
Flashing green—Port activity
Description
•
Off—No link
•
Solid green—Link operating at maximum speed—100G for
QSFP28 port
•
Flashing green—Link activity operating at maximum speed—
100G port
•
Solid yellow—Link operating at a lower speed—40G or 10G
port
•
Flashing yellow—Port activity at a lower speed—40G or 10G
port
•
Flashing yellow, 1 second on/off—Port beacon