Dell S6000-ON Installation Manual - Page 30
Browse online or download pdf Installation Manual for Switch Dell S6000-ON. Dell S6000-ON 41 pages. Open networking
Also for Dell S6000-ON: Getting Started Manual (26 pages), Troubleshooting Manual (29 pages)
Print Page
Besides the 10 GbE and 40 GbE switch ports, the S6000-ON provides several ports for management and storage.
Topics:
•
RS-232 console port access
•
USB-B console port access
•
Before you install an OS system
•
USB storage
RS-232 console port access
The RS-232 console port is on the I/O-side of the S6000-ON chassis, as shown.
Figure 15. RS-232 console port location
1
RS-232 Console Port
NOTE:
Before starting this procedure, be sure that your PC has a 9-pin serial port and that you have a terminal emulation
program already installed and running on the PC.
NOTE:
If your PC's serial port cannot accept a female DB-9 connector, acquire a DB-9 male-to-male adaptor.
1
Install the provided RJ-45 connector side of the provided copper cable into the S6000-ON console port.
2
Install the DB-9 female side of the provided copper cable into your PC's serial port or into other DTE terminal server hardware that you
intend to use.
3
Keep the default terminal settings on the console as follows:
•
115200 baud rate
•
No parity
30
Management ports
Management ports
8