Dell Z9000 Quick Start Manual - Page 21

Browse online or download pdf Quick Start Manual for Switch Dell Z9000. Dell Z9000 27 pages. Z9000 system
Also for Dell Z9000: Manual (48 pages)

Print Page

Configure the Management Route

Define a path from the system to the network from which you are accessing the

system remotely. Management routes are separate from IP routes and are only

used to manage the system through the management port.

To configure a management route, follow this step:

Task

Configure a

management route to

the network from

which you are

accessing the system.

Configure the Username and Password

To access the system remotely, configure a system username and password.

To configure the username and password, follow this step:

Task

Configure a username

and password to

access the system

remotely.

Configure the Enable Password

EXEC Privilege mode is unrestricted by default. Configure a password as a

basic security measure. There are two types of enable passwords:

•

enable password—stores the password in the running/startup configuration

using a Data Encryption Standard (DES)-encryption method.

•

enable secret—stores the password in the running/startup configuration using

a stronger, MD5 encryption method.

Dell Force10 recommends using the enable secret password.

Command Syntax

management route ip-address/mask

gateway

Command Syntax

username username password

[encryption-type]

Command Mode

CONFIGURATION

Command Mode

CONFIGURATION

Installing the Software