EarthQuake MiniMe P8 User Manual - Page 8
Browse online or download pdf User Manual for Speaker System EarthQuake MiniMe P8. EarthQuake MiniMe P8 16 pages. Earthquake minime p8 subwoofer user's manual
Also for EarthQuake MiniMe P8: User Manual (8 pages), User Manual (16 pages)
Print Page
Connections
Please consider the following when setting up
your new system:
• Before making or changing any connections,
ALWAYS make sure that the subwoofer is unplugged
from the wall and your other components are turned
OFF. Also, turn down the volume control of the
subwoofer and your pre-amplifier or receiver.
AC outlets on the same circuit breaker
• This diagram shows all the low power components
sharing a power strip which is connected to the same
outlet used by the amplifier.
• The subwoofer is connected to an outlet on the
same circuit breaker, provided that the total system
current draw does not exceed the breaker current
rating.
• This arrangement will reduce the possibility of an
audible hum in your system caused by a ground loop.
• Whenever possible, keep the power cords away
from the signal cable or speaker wires to prevent any
hum or inference being heard in speakers.
Earthquake • MiniMe User Manual
Tape Deck
DVD
Pre-amplifier
Power strip
Amplifier
Subwoofer
• Choose reliable, high quality interconnect cables,
also called patch cords or RCA cables. They should
be fully shielded and as short as possible for the job.
The longest cable in your system will likely be to the
subwoofer, so choose a good quality brand.
• Some patch cords can be a very tight fit and there is
usually a preferred method of getting them off. Some
have to be re=moved with a twisting action. Be gentle
or you may damage the jacks of the subwoofer or
your other components.
Speaker Level Connections
• The subwoofer's Speaker Level Inputs can accept
speaker stripped speaker wires only.
• Make sure that the negative speaker wires never
touch the positive wires as this will short out and
possibly damage your amplifier or receiver.
8