EarthQuaker Devices Transmisser Operation Manual

Browse online or download pdf Operation Manual for Recording Equipment EarthQuaker Devices Transmisser. EarthQuaker Devices Transmisser 2 pages.

Print Page

<<< Switching >>>

This device is true bypass and uses electronic relay-based switching. Audio will not pass

without power.

<<< Power Requirements >>>

• Current Draw: 76mA

• This device take a standard 9 volt DC power supply with a 2.1mm negative center barrel. We

always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple

isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power.

Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter

dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

<<< Tech Specs >>>

• Input Impedance: 1M Ohm

<<< Warranty >>>

This device has a limited lifetime warranty. If it breaks, we will fix it. Should you encounter any

issues, please email [email protected].

www.earthquakerdevices.com

• Output Impedance: <1K Ohm

O P E R A T I O N M A N U A L