Earthsafe M300 Installation, Operation And Maintenance Manual - Page 7

Browse online or download pdf Installation, Operation And Maintenance Manual for Sander Earthsafe M300. Earthsafe M300 16 pages. Filtration polisher

Print Page

INSTALLATION, OPERATION, AND MAINTENANCE

EMERGENCY POWER FUEL SYSTEMS

Physical Description

1. Containment Base: Rigid support for pump set

with liquid tight containment of leaks.

2. Control panel support: Support for OmniPlex

Controller and pump motor starter panels.

3. Pump support bracket: Support pump and

motor for vertical mounting

4. Filter support bracket: Support filter vessel and

allow for filter element change.

5. Filter Vessel and Elements: racor FBO filter

vessel and particulate / coalescing elements.

6. Pump : Viking positive displacement pump.

7. Pump internal relief valve: Adjustable pressure

relief on pump form discharge to suction side.

Protects downstream piping from over-pressure,

and limits pump operation to within its power

range.

8. Motor: TEFC motor. 120-240 VAC single phase

or 240-480 VAC three phase.

9. Inlet strainer / screen: Located on pump inlet to

protect pump from inlet piping debris.

Threaded drain / cleanout port is provided.

10. Outlet check valve: Located on pump discharge

to maintain pressure in pipeline, and allow

alternate pump operation without backflow.

Check valve is an in-line wafer style with 3 PSI

cracking pressure to prevent chatter.

11. Inlet and outlet ball valves: carbon steel ball

valves with Teflon seats, to allow isolation of

pumps for maintenance.

12. Inlet and outlet pipe assembly: Welded steel

pipe with 1" MNPT connection for field piping.

Connect at either end of pump set.

13. Pressure and vacuum gauges: To confirm pump

operation and assist troubleshooting. Standard

Liquid filled, ¼" NPT bottom port, 2.5" diameter

gauges. Vacuum 0 to -30 IN-Hg. Pressure 0-100

PSI.

Model M300

Filtration Polisher

7 of 16

earth safe

Fuel Systems for Critical Power