Christie 38-817001-01 Series Installation Instructions
Browse online or download pdf Installation Instructions for Racks & Stands Christie 38-817001-01 Series. Christie 38-817001-01 Series 2 pages. Projector mount
Also for Christie 38-817001-01 Series: Installation Manual (13 pages)
Print Page
38-817001-01 INSTALLATION INSTRUCTIONS
Mounting
Bracket
1.
Invert the projector and place it on a soft and flat surface.
2.
Locate the mounting points found on the bottom of the chassis.
3.
Align the bracket to the projector mounting points.
NOTE:
Raise or remove any feet levelers or any obstacle that may prevent the bracket from properly
aligning to the mounting points.
4.
To install the mounting bracket to the projector, align the bracket with the mounting. Secure the seven
(7) M8 x 10 (mm) Phillip screws. Do not over tighten the screw (Figure 1).
NOTE:
Please refer to the PROJECTOR MOUNT BASE BOX ASSEMBLY Installation
Instructions Manual for information on how the 38-817001-01 will attach to the Base
Box.
Installation Instructions
M8 x 10mm
Phillips Head
Screw (7ea)
38-817001-01 Projector Mount
M8 Flat
Washer (7ea)
Page 1