Christie LS3S User Manual - Page 11

Browse online or download pdf User Manual for Speakers Christie LS3S. Christie LS3S 18 pages. Recommended crossover and filter settings
Also for Christie LS3S: Instruction Sheet (5 pages)

Print Page

Installation

• Before installation, inspect all components for cracks, deformations, corrosion, and

• Speakers must be affixed to a suitable structure following all local safety standards and

• Only use attachments or accessories specified by the manufacturer.

Failure to comply could result in death or serious injury.

• Allow speakers exposed to extremely low temperatures to warm for a minimum of one

• Speaker wire affects sound quality. Make sure the speaker wire quality and gauge are

Complete the following procedures to install the speaker.

Connect the speaker wire

The amplifier must be turned off and unplugged before you start this procedure.

1. Install the speaker according to the mounting instructions provided in this manual.

2. Connect the speaker wire to the positive (A) and negative (B) terminals on the back of the

speaker.

Use a #8 spade lug (part number: 145-159106-XX) if you are creating crimped spade lug

terminations.

Christie Vive Audio LS3S Speaker User Manual

020-101269-01 Rev. 1 (03-2015)

missing or damaged parts that could reduce their installation strength.

regulations.

hour before playing them at typical application levels. Failure to comply may result in

equipment or property damage.

appropriate for your application.