Christie LS3S User Manual - Page 14

Browse online or download pdf User Manual for Speakers Christie LS3S. Christie LS3S 18 pages. Recommended crossover and filter settings
Also for Christie LS3S: Instruction Sheet (5 pages)

Print Page

Troubleshooting

Do not service the speaker. All servicing must be completed by qualified service personnel.

Failure to comply could result in minor or moderate injury.

Problem

The speaker does not function

The speaker sound is degraded

There is speaker noise or hiss

Christie Vive Audio LS3S Speaker User Manual

020-101269-01 Rev. 1 (03-2015)

Resolution

• Verify that the speaker is receiving power from the amplifier.

• Verify that the circuit breaker for the main circuit to the amplifier is open.

• Reset the circuit breaker. If the AC mains breaker continues to open, check

the voltage and amperage of the circuit.

• Verify that the negative and positive speaker wires from the speaker are

correctly connected to the terminals on the amplifier.

• Visually inspect the speaker for deterioration or holes.

• Reduce the output level of the source.

• Verify that the negative and positive speaker wires from the speaker are

correctly connected to the terminals on the amplifier.

• Verify that there are no missing screws. Replace all screws that you removed

during installation.

• Have an authorized dealer complete an audio test (for example, pink noise,

frequency sweeps, and content and program material).

• Mute channels, one at a time, to isolate the problem.

• Verify that the cables are in good working condition.

• Reroute audio cables away from AC power and lighting cables.

• Verify correct gain structuring of B Chain and input and output levels of

source devices and amplifiers.

• Check the polarity.