Christie UHD751-P Service Manual - Page 13

Browse online or download pdf Service Manual for Industrial Monitor Christie UHD751-P. Christie UHD751-P 20 pages.

Print Page

b) Remove the speakers.

c) Remove the four screws located under the speakers.

4. Mark and remove all connectors.

5. Using a Phillips #1 screwdriver, remove the two screws securing the joystick board to the

display panel.

6. Replace the joystick board.

7. To install the replacement part, follow these steps in reverse order.

Replacing the OPS board

The OPS board sends the content on the OPS module to the main AD board.

1. Remove the rear cover.

2. Mark and remove all connectors.

3. Using a Phillips #1 screwdriver, remove the four screws securing the OPS board to the display

panel.

UHD751-P Service Guide

020-102686-01 Rev. 1 (01-2018)

Replacement procedures