Miele PW 5062 Operating And Installation Instructions - Page 9
Browse online or download pdf Operating And Installation Instructions for Washer Miele PW 5062. Miele PW 5062 26 pages.
![Miele PW 5062 Operating And Installation Instructions](/uploads/products/server2/3399979/3399979.jpg)
~
Textiles which have been
pre-treated in solvent based cleaning
agents must be thoroughly rinsed in
clean water before being washed in the
machine.
~
Never use solvent based cleaning
agents, e.g. those containing benzine,
in this machine, as this may result in
damage to component parts and create
toxic fumes. Such agents also pose a
fire and explosion hazard.
~
Benzine, petrol, paraffin, or any
easily flammable liquid must not be
stored or used near the machine. Fire
and explosion risk!
~
Only use dyes specified by the
manufacturer as being suitable for use
in a washing machine. Always observe
the manufacturer's instructions
carefully.
~
Colour run and dye removers
contain sulphur compounds which can
cause damage such as corrosion. Do
not use these products in this machine.
~
Avoid contact of stainless steel
surfaces (front, lid, casing) with liquid
cleaning and disinfecting agents which
contain chlorine or sodium
hypochlorite. These agents can have a
corrosive effect on stainless steel.
Aggressive vapours containing chlorine
bleach can also be corrosive. Do not
store open containers of these agents
near the machine.
Warning and Safety instructions
~
Do not use a high pressure cleaner
or hose to clean the machine.
~
It is particularly important to observe
the manufacturer's instructions when
using a combination of cleaning agents
and special application products.
Products must only be used for
applications approved by the
manufacturer to avoid any material
damage or the occurrence of strong
chemical reactions
Accessories
~
Accessory parts may only be fitted
when expressly approved by Miele. If
other parts are used, guarantee,
performance and product liability
claims will be invalidated.
Miele cannot be held liable for
damage caused by non-compliance
with these Warning and Safety
instructions.
9