Miele PW 6131 Operating Instructions Manual - Page 35
Browse online or download pdf Operating Instructions Manual for Washer Miele PW 6131. Miele PW 6131 46 pages. Profitronic m innovation m
Also for Miele PW 6131: Operating Instructions Manual (44 pages), Programming Instructions Manual (48 pages), Programming Instructions Manual (48 pages)
Print Page
Heating system fault
§
Programme stop
Press the start button.
i
^ To continue the programme with heating
press the h "Start" button. If a disinfection
programme was running the programme
will be cancelled if this message appears.
Call the Service Department.
Drive motor fault
m
Programme stopped. Press the start button.
Motor overheating.
i
^ Allow the motor to cool down.
Imbalance fault
§
Call the Service Department
if restart does not work.
i
The imbalance is too great and the
imbalance switch has been activated.
^ Switch the machine off and on again.
Then press the h "Start" button.
Gas system fault
§
Open the gas tap.
Press the start button.
i
If this message appears before a
programme has been started:
^ Open the gas tap and then press the "h
Start" button.
If this message appears during a
programme the pressure in the gas supply
has dropped because of other gas heated
appliances operating at the same time.
^ Press the h "Start" button.
M.-Nr. 06 533 412
Gas system fault
§
Call the Service Department
if restart does not work.
i
f
^ If the programme still will not start please
call the Service Department.
Gas system fault
§
Clean the lint filter.
Press the start button.
i
Clean the lint filter as described in "Cleaning
and care" and then press the h "Start"
f
button.
On gas heated machines heavy foaming can
lead to a fault.
Drain valve fault
q
Call the Service Department
if restart does not work.
A
i
^ Check the on-site drainage system and
then press the "h Start" button.
A defective drain valve must be repaired by
a Miele Service technician only.
Dispensing system fault
ö
Fill dispenser 1
Press the start button.
i
f
Replace the empty container with a full one.
Card fault
§
Card incorrectly inserted in card reader.
i
^ Insert the card the right way round in the
card reader.
Problem solving guide
f
f
f
f
f
35