Miele PW 6163 Operating Instructions Manual - Page 35
Browse online or download pdf Operating Instructions Manual for Washer Miele PW 6163. Miele PW 6163 46 pages.
Print PageError messages
,
Repairs to electrical or steam
operated machines may only be carried
out by a suitably qualified person in
accordance with national and local safety
regulations. Repairs and other work by
unqualified persons could be dangerous.
The manufacturer cannot be held liable
for unauthorised work.
A message will appear in the display if there
is a problem either before starting a
programme or once it has started.
The display remains dark.
There is no power to the machine.
^ Check the mains switch and the on-site
fuses.
Power cut
y
Programme stopped.
Press the start button.
^ Once power has been restored press the
"START" button.
Water inlet fault
M
Call the Service Department
if restart does not work.
i
^ Check the stopcock and then press the
"START" button.
Door lock fault
a
Call the Service Department
if restart does not work.
i
^ If the programme still will not start please
call the Service Department.
Heating system fault
§
Programme stopped.
Press the start button.
i
^ To continue the programme with heating
press the START button. If a disinfection
programme was running the programme
will be cancelled if this message appears.
Call the Service Department.
Drive motor fault
m
Programme stopped. Press start.
Motor overheating.
i
^ The winding on the motor has overheated.
Let the motor cool down and then press
the "START" button.
Imbalance fault
§
Call the Service Department
if restart does not work.
i
f
The imbalance is too great and the
imbalance switch has been activated.
^ Press the START button.
Drain valve fault
q
Call the Service Department
if restart does not work.
i
f
^ Check the on-site drainage system and
then press the START button.
A defective drain valve must be repaired by
a Miele Service technician only.
f
Problem solving guide
f
f
A
f
35