Miele PW 6241 Operating And Installation Instructions - Page 27
Browse online or download pdf Operating And Installation Instructions for Washer Miele PW 6241. Miele PW 6241 44 pages.
Also for Miele PW 6241: Operating And Installation Instructions (44 pages), Operating Instructions Manual (46 pages), Programming Instructions Manual (48 pages)
Print Page
Peak load cutoff
When activating the peak load cutoff the
heat is turned off and the program is
stopped. The display shows:
1
Hot Wash
Program stop - Peak load function
Program will continue.
ü
i
When the peak load function ends the
program will continue automatically.
PC Connection
A serial interface is located at the rear of the
washer to connect the machine to a PC
(Personal Computer).
PC-Operation: Program changes can be
made via a PC, or a new program can be
downloaded.
Printer-Operation:
It is possible to print out whole programs or
parts of programs.
This requires a special Editor Program which
is available from the Miele Professional
Department.
Load module
If the machine is equipped with a load
module, the load weight will be displayed, in
0.5 lb increments, while loading the laundry.
The maximum laundry weight is displayed
next to the selected program.
^ Reset with the -> I <- "zero - setting" if the
weight display does not show "00.0" when
f
the drum is empty.
1
Hot Wash
140 °F
Main wash
Rinse
+i
If there was still laundry in the drum when
the weight display was reset, the display
shows:
1
Hot Wash
140 °F
Main wash
Rinse
+i
^ Reset again with the -> I <- button.
If the machine is overloaded (wet laundry)
the machine calculates after the programs
start with the nominal value. This value is
saved in the operating data module.
At the end of a program, with the drum
stationary, the residual moisture of the
laundry is displayed.
1
Hot Wash
Program end
Door can be opened.
See "Use - Adjust the program" for more
information.
Optional modules
m
k
m
m
k
m
Residual moisture 60 %
FC
m
00.0 /
56 lb
e
A
-> I <-
- -.- /
56 lb
e
A
-> I <-
A
27