Miele PW 811 Installations Plan - Page 18

Browse online or download pdf Installations Plan for Washer Miele PW 811. Miele PW 811 38 pages.

Print Page

Installation and planning notes

XKM RS232

communication

module

Vapour and foam

venting kit (BWS)

The serial interface RS232 can be retrofitted to the washing machine

via an XKM RS232 communication module (optional accessory

available from Miele). This communication module must only be used

with Miele Professional machines that are fitted with an appropriate

slot for the module.

The data interface provided via communication module

XKM RS232 complies with SELV (Safety Extra Low Voltage) in

accordance with EN 60950.

Appliances connected to this interface must also be SELV

compliant.

Communication module XKM RS232 is supplied with a connection

cable and a D-sub-connector.

The machine can be installed on a plinth (open or box plinth, available

as an optional Miele accessory).

Elevating the washing machine gives a better ergonomic working

position when loading or unloading. It also simplifies the installation

of a waste water connection.

 The washing machine must be secured to the plinth

immediately after installation. The plinth must be secured to the

floor.

There is a risk of the washing machine falling off a raised plinth

during a spin cycle if it is not secured.

The washing machine is optionally available with a weighing plinth. In

this version, the actual weight of the laundry load is displayed in

0.2 kg increments during loading along with the maximum laundry

load weight for the unit.

Make sure that the washing machine is not in contact with objects

or people located nearby or leaning against it. They could be

weighed as well and falsify the load weight shown in the display.

If excessive suds form, foam may escape from the vapour vent. To

remove the foam, an optional vapour and foam venting kit (BWS) can

be used.

PW 811 / PW 814 / PW 818