Miele W 6071 Operating Instructions Manual - Page 13
Browse online or download pdf Operating Instructions Manual for Washer Miele W 6071. Miele W 6071 38 pages.
Also for Miele W 6071: Operating Instructions Manual (40 pages), Operating And Installation Instructions (44 pages)
Print Page
Pauses between programming steps must
not last longer than 25 seconds, otherwise
the display returns to the basic stage,
(such as On) and the changes are not
stored in memory
Setting the local language (if
necessary)
To set the local language the programming
mode must be accessed by pressing simul-
taneously on the Mains on switch Y and the
Start button X. Normally German and one
other language are available.
^ Switch on the on-site mains switch.
^ Turn the key switch to position "B" (Opera-
tion).
^ Press the OFF button Z to switch off the
machine.
^ Press the Start button X and the ON but-
ton Y at the same time and hold pressed
in, until the Display shows the following:
SETTING LOCAL LANGUAGE
DEUTSCH
After selection press Start button.
^ Select the required language with the Cur-
sor buttons 1 2 .
The display content being shown is imme-
diately converted into the language se-
lected .
^ Confirm with the Start button X .
The complete display contents are con-
verted into the language selected.
M.-Nr. 06 006 850
>ENGLISH<
Setting current time and date
^ Switch the machine off with the Mains off
switch Z .
^ Turn the key switch to position "B".
^ Press the Delay start button W and the ON
button Y at the same time, and hold
pressed in, until the Display shows the fol-
lowing:
SETTING TIME AND DATE
Time of day
Date
23. 03. 2000
After selection press Start button.
^ Use the Cursor button 2 to position the cur-
sor on the input field for hours and set the
hours with the Plus or Minus button 4 3.
^ Use the Cursor button 2 to position the
cursor on the input field for minutes and
set the minutes with the Plus or Minus but-
ton 4 3.
^ Position the Cursor on Day and set the day
with the Plus or Minus button 4 3.
^ Position the Cursor on Month and set the
month.
^ Position the Cursor on Year and set the
year.
^ Store in memory with the Start button X .
If the Delay start button W is pressed dur-
ing a running programme the current time
of day and date are shown.
Operation
>14< : 30 hrs
13