Miele WS 5323 Operating Instructions Manual - Page 34
Browse online or download pdf Operating Instructions Manual for Washer Miele WS 5323. Miele WS 5323 36 pages.
Print Page
Installation
Electrical connection
All electrical work must be carried out by a
suitably qualified and competent person in
compliance with national and local regulations.
Please take note of the Wiring diagram and
the Installation Diagram and instructions sup-
plied. They are important for electrical connec-
tion.
The machine is supplied as standard for con-
nection to a AC 3N 50 Hz electricity supply.
The voltage, frequency are stated on the data
plate.
Variants
3 N AC 380-415 V 50-60 Hz
:
3 AC 220-240 V 50-60 Hz
The electric heater rating is set ex-works to
24 kW (WS 5243),
30 kW (WS 5323).
The minimum suds level required for activat-
ing the heating given in mm column of water
is 110 mm.
The motor is fitted with an overload protection
switch.
Connection should be made via a suitable, ap-
proved isolator, with an on-off switch which is
easily accessible for servicing.
WARNING
THIS APPLIANCE MUST BE EARTHED
M.-Nr. 05730940
Steam connection
Steam connection must only be undertaken
by an authorised installer.
Please take note of the Installation Diagram
and instructions supplied. They are important
for steam connection.
Do not attempt to carry out any repair work
to this machine yourself. Any damage or re-
pair work may only be carried out by a suit-
ably qualified and competent person in ac-
cordance with local and national safety
regulations.
Please contact the Miele Service Dept. or
your Miele supplier in the event of a fault or
any damage to the machine.
After installing and connecting the machine
to the services ensure that all outer panels
have been put back in place.
34