Allmand Night-Lite E Series Operator's Manual - Page 15

Browse online or download pdf Operator's Manual for Lighting Equipment Allmand Night-Lite E Series. Allmand Night-Lite E Series 20 pages. Portable light tower

Print Page

Lowering the Light Tower

1. Shut down the lights. See Operating

The Tower Lights.

2. Remove the hair pin cotter and tower

locking pin from the hole in the tower.

Place the tower locking pin in the

stowing hole and secure with the hair

pin cotter. See Figure 12.

3. Turn the Tower / Light switch (C,

Figure 11) to the TOWER position.

4. Remove the remote tower control (D,

Figure 11) from the control panel and

stand back from the unit base.

5. Move the remote tower control switch

to the DOWN position until the tower

is fully lowered (B, Figure 13).

Figure 13

Operating The Tower Lights

WARNING

Looking at illuminated light fixtures

could result in serious injury. Never

look directly at illuminated light fixtures.

Turning The Lights On

1. Unlatch and open the control panel

door.

2. Turn the main circuit breaker (A,

Figure 14) to the ON position.

3. Select the preferred mode of opera-

tion: Timer / Manual or Photocell.

See Light Operation Mode.

4. Turn the Tower / Light switch (B,

Figure 14) to the LIGHT position.

5. Turn the individual light switches

(C, Figure 14) (1 - 4) to ON (if set to

OFF).

NOTE: If the mode of operation is set

to Photocell or Timer, the lights will

not come on until dark (photocell) or

until the time selected (timer).

Turning The Lights Off

• If in Manual Mode, turn manual mode

off. See Light Operation Mode.

• If in Photocell or Timer mode, the

lights will turn off automatically in

ambient light (photocell) or at the time

selected (timer).

Figure 14

Light Operation Mode

The tower lights can be controlled man-

ually, by photocell, or by timer.

Manual Operation

1. Turn the Photocell / Timer switch (B,

Figure 15) to the TIMER position.

2. Press the OVR button (G, Figure

15) on the timer module to turn on

Manual mode. Press again to turn off.

Photocell Operation

Turn the Photocell / Timer switch (B,

Figure 14) to the PHOTOCELL position.