Miele G 2120 Manual - Page 25

Browse online or download pdf Manual for Dishwasher Miele G 2120. Miele G 2120 46 pages.
Also for Miele G 2120: Manual (14 pages)

Print Page
G 1xxx/G 2xxx
Function
Shortening program
sequence
Water quantity
normal/increased
Second interim rinse
Activating/deactivating
improved drying
Appliance height setting
Model setting
Country setting

Table 15: Service Programming Mode Summary, G 2020

1
If the electronic needs to be replaced during servicing, the following steps must be taken
during programming: In the first step, set the country specification and model, then switch
off the appliance. Repeat access and set appliance height and the appropriate on-site
water hardness.
2
The SER country specification includes the following countries: Portugal, France, the
Netherlands, Belgium and Great Britain.
Save and quit:
Switch off the appliance.
Programming
Press the Start/Stop
button 3x.Turn the selector
switch to 6 o'clock. To
change the setting, press
the Start/Stop button.
Press the Start/Stop
button 3x.Turn the selector
switch to 7 o'clock. To
change the setting, press
the Start/Stop button.
Press the Start/Stop
button 4x.Turn the selector
switch to 3 o'clock. To
change the setting, press
the Start/Stop button.
Press the Start/Stop
button 4x.Turn the selector
switch to 5 o'clock. To
change the setting, press
the Start/Stop button.
Press the Start/Stop
button 5x.Turn the selector
1
switch to 9 o'clock. To
change the setting, press
the Start/Stop button.
Press the Start/Stop
button 6x.Turn the selector
1
switch to 3 o'clock. To
change the setting, press
the Start/Stop button.
Press the Start/Stop
button 6x.Turn the selector
switch to 5 o'clock. To
1
change the country
version set, press the
Start/Stop button.
25
Technical Information
Display
"Rinse" LED is off = program
running time per factory setting;
"Rinse" LED flashes = shortened
program running time. Program-
dependent shortcut due to a
decrease in temperature and/or the
removal of hold times.
"Rinse" LED is off = normal water
amount; "Rinse" LED flashes =
increased water amount.
"Rinse" LED is off = factory-set
program; "Rinse" LED flashes =
second interim rinse added.
"Rinse" LED is off = normal drying;
"Rinse" LED flashes = enhanced
drying activated. If activated, the
drying time will be extended and the
final rinse temperature increased.
"Rinse" LED is off = standard
machine height (G1xxx); "Rinse"
LED flashes = XXL models (G2xxx).
"Rinse" LED is off = models with
UTT version 1 or version 2: Gx021,
Gx022, Gx023, Gx04x; "Rinse" LED
flashes = models without UTT:
Gx02x.
The flashing rhythm of the "Rinse"
LED shows which country is
programmed: 1x = Europe; 2x =
Australia; 3x = USA; 4x = Japan; 5x
= Italy/Spain, 6x = Southern
2
Europe.