Miele G 349 Installation Instructions Manual - Page 21

Browse online or download pdf Installation Instructions Manual for Dishwasher Miele G 349. Miele G 349 25 pages. Eye-level dishwashers

Print Page

Water in the dishwasher must

not be used as drinking water.

– The dishwasher may be connected

to a cold or hot water supply, max.

60 °C. When connected to a hot wa-

ter supply all programme stages

which would otherwise be carried out

with cold water (pre-wash and in-

terim rinse) as well as the Pre-wash

programme will be carried out with

hot water.

– The programme "Energy save" (with-

out heater) needs connection to a

hot water supply with a temperature

of at least 45 °C.

– The inlet hose is approx. 4.5 m long.

– A stopcock with a 3/4 " male thread

must be provided on site.

– The dishwasher is constructed to

comply with DVGW regulations, and

may be connected to a suitable sup-

ply without an extra non-return valve

if national regulations allow this.

– The water pressure (flow pressure at

the take-off point) must be between

0.3 and 10 bar.

If the water pressure is too low the

Water "inlet" or "inlet / drain" light (de-

pending on model) may light up,

(see "Problem solving guide" in the

Operating Instruction booklet).

If the water pressure is too high, a

pressure reducer valve must be fit-

ted.

The water inlet hose must not be

shortened or damaged in any way,

(see illustration).

If the stopcock is situated in the

worktop, a special angle connector can

be ordered from the Miele Spare Parts

Dept. (Part No. 04 274 820).