Miele DG 155-2 Installation Instructions Manual - Page 3
Browse online or download pdf Installation Instructions Manual for Oven Miele DG 155-2. Miele DG 155-2 12 pages. Steam oven
Also for Miele DG 155-2: Product Dimensions (1 pages), Installation Instructions Manual (12 pages)
Print Page
,
WARNING - Read all
instructions before installation or
use of the steam oven to prevent
injury and machine damage.
Before installation make sure that
the voltage and frequency listed on
the data plate correspond with the
household electrical supply. This data
must correspond to prevent injury and
machine damage. Consult a qualified
electrician if in doubt.
Installation, repair and
maintenance work should be by a
Miele authorized service technician.
Work by unqualified persons could be
dangerous and may void the warranty.
Before installation or service,
disconnect the power supply to the
work area by removing the fuse,
"tripping" the circuit breaker, or
switching off the power main. Ensure
that the power is not restored to the
appliance during maintenance or repair
work.
Do not use an extension cord to
connect this appliance to
electricity. Extension cords do not
guarantee the required safety of the
appliance, (e.g. danger of overheating).
Do not operate any appliance with
a damaged cord or plug or after
the appliance has been damaged in
any manner. Return the appliance to
the nearest authorized service facility
for examination, repair or adjustment.
IMPORTANT SAFETY INSTRUCTIONS
operate a damaged unit. Contact the
place of purchase.
access all cooking levels and
containers.
installations such as caravans or
aircraft. However, under certain
conditions it may be possible for an
installation in these applications. Please
contact the nearest Miele dealer or the
Miele Technical Service Department
with specific requirements.
a counter top. This is necessary to
ensure that all electrical components
are shielded.
a qualified technician. To guarantee the
electrical safety of this appliance,
continuity must exist between the
appliance and an effective grounding
system. It is imperative that this basic
safety requirement be met. If there is
any doubt, have the electrical system of
the house checked by a qualified
electrician. The manufacturer cannot be
held responsible for damage caused
by the lack, or inadequacy of, an
effective grounding system.
mechanical parts. Never open the outer
casing of the appliance.
Inspect the steam oven for
shipping damage. Do not install or
The steam oven should be installed
at a safe height for users to safely
This equipment is not designed for
maritime use or for use in mobile
This steam oven is designed for
installation in cabinetry or beneath
Be certain your appliance is
properly installed and grounded by
Do not tamper with electrical
connections and components or
3