Miele ESW 47XX Operating And Installation Instructions - Page 10
Browse online or download pdf Operating And Installation Instructions for Oven Miele ESW 47XX. Miele ESW 47XX 44 pages. Built-in warming drawer esw 408*-14; esw 47 series; esw 48 series
Also for Miele ESW 47XX: Installation Instructions Manual (11 pages), Installation Instructions Manual (23 pages)
Print Page
Before the first use
When first connecting the appliance to
the power supply and after a power
failure, the fan will run and a display
test will be carried out for
approx. 10 seconds. The appliance
cannot be used during this time.
Clean the appliance
^ Remove any protective wrapping.
^ Remove the non-slip mat and clean
with a solution of warm water and
liquid dish soap. Dry with a soft cloth.
^ Clean the warming drawer, inside
and out, with a damp cloth and wipe
dry.
^ Replace the non/slip mat once has
completely dried.
10
Heat the appliance
Heat the warming drawer for a
minimum of 2 hours.
^ Turn on with the "On/Off" touch
control
^ Tap the "Menu" touch control until the
2 symbol lights.
^ Tap the "Temp." touch control until
th
the 5
indicator lights.
^ Tap the "Timer" touch control until 2h
lights up.
^ Close the drawer.
The warming drawer is fitted with a
self-closing device.
The drawer is also fitted with a
contact switch which will only allow
the heating and fan to work if the
drawer is closed.
^ Vent the room when heating the
drawer for the first time.
Metal components have a protective
coating which may give off a slight odor
the first time your new appliance is
heated. The smell will dissipate after a
short time and does not indicate a
faulty connection.
^ The warming drawer will turn off
automatically after 2 hours.