Miele 09 968 280 Operating And Installation Instructions - Page 20
Browse online or download pdf Operating And Installation Instructions for Ventilation Hood Miele 09 968 280. Miele 09 968 280 36 pages. Ventilation hood da 5996 w miele
Print Page
Cleaning and care
To remove a grease filter, release the
locking clip. Then, open the filter to a
45° angle, unhook it, and remove it
from the hood.
Cleaning the grease filter by hand
Clean the filters with a soft nylon
brush in a mild solution of hot water
and dish soap. Do not use undiluted
dish soap.
Unsuitable cleaning agents
Unsuitable cleaners can cause damage
to the filter surfaces if used regularly.
Do not use any of the following:
– Lime removers
– Abrasive powders or abrasive liquids
– Aggressive all-purpose cleaners and
degreaser sprays
– Oven sprays
Cleaning the grease filter in a
dishwasher
Place the filters as upright or inclined
as possible in the lower basket.
Ensure that the spray arm is not
obstructed.
Use a common household
dishwasher detergent.
20
Select a program with a wash
temperature between 122°F (50°C)
and 149°F (65°C).
Depending on the cleaning agent
used, cleaning the grease filter in a
dishwasher can cause permanent
discoloration to the surface. However,
this will not affect the functioning of
the filter in any way.
After cleaning
After cleaning, leave the filters on an
absorbent surface to dry.
When removing the filter for cleaning,
also clean off any residues of oil or
fat from the now accessible casing to
prevent the risk of these catching fire.
Replace the grease filter, making sure
that the locking clip is facing down
towards the cooktop.
If the filters have been installed
incorrectly, you can insert a small
screwdriver into the slit to disengage
the locking clip.