Miele DA 1160 Operating And Installation Instructions - Page 25

Browse online or download pdf Operating And Installation Instructions for Ventilation Hood Miele DA 1160. Miele DA 1160 32 pages. Built-under ventilation hood
Also for Miele DA 1160: Information (4 pages), Operating And Installation Instructions (32 pages), Operating And Installation Instructions (40 pages)

Print Page

^ Attach the hood to the wall anchors.

^ Tighten the two screws at the left and

the right on the back of the device.

These are used to adjust the tilt and

secure the hood in position.

^ Reinstall the overhead lights.

^ Put the grease filter back in place.

^ If extraction mode is used, install the

exhaust ducting and connections.

For air extraction mode:

^ For an C 6" (150 mm) exhaust duct,

use a pointed knife to cut off the

exhaust collar where it tapers.

For an C 5" (125 mm) exhaust duct,

use the collar as is.

^ If required, insert the non-return flap.

Ensure that the flap opens easily and

closes by itself.

Installation