Miele DA 1160 Operating And Installation Instructions - Page 12

Browse online or download pdf Operating And Installation Instructions for Ventilation Hood Miele DA 1160. Miele DA 1160 32 pages. Built-under ventilation hood
Also for Miele DA 1160: Information (4 pages), Operating And Installation Instructions (32 pages), Operating And Installation Instructions (40 pages)

Miele DA 1160 Operating And Installation Instructions

Cleaning and care

,
Before any cleaning or
maintenance work is carried out,
disconnect the rangehood from the
mains supply. Ensure that
– it is switched off at the wall socket
and the plug is removed, or
– the mains fuse is withdrawn, or
– the screw-out fuse is removed (in
countries where this is applicable).
,
The halogen lamps get very hot
during use, and remain hot for some
time after being switched off.
The hot halogen lamps can be
damaged if water is used to clean
them.
To avoid burns to yourself or
damage to the lamps, wait several
minutes after switching off before
beginning cleaning.

Housing

General information
The surfaces and controls are
susceptible to scratches and
abrasions. Please observe the
following cleaning instructions.
All external surfaces and controls can
be cleaned using warm water with a
small amount of washing-up liquid
applied with a well wrung-out soft
sponge or cloth.
After cleaning, wipe the surfaces dry
using a soft cloth.
12
Do not use too much water when
cleaning the controls. Moisture
could penetrate into the electronics
and cause damage.
Do not use:
– cleaning agents containing soda,
acids, chlorides or solvents,
– abrasive cleaning agents, e.g.
powder cleaners or cream cleaners
and abrasive sponges, as well as pot
scourers or sponges which have
been used previously with abrasive
cleaning agents. These will damage
the surface material.
Important for appliances with
stainless steel housing
(This infomation does not apply to the
controls)
Stainless steel surfaces can be cleaned
with a proprietary non-abrasive
cleaning agent designed specifically
for use on stainless steel.
To prevent immediate resoiling, the
Original Miele care product for stainless
steel can be purchased from Miele or at
www.miele-shop.com (depending on
country). Apply sparingly with a soft
cloth following the instructions on the
packaging.