Miele DA 1255 Operating And Installation Instructions - Page 30
Browse online or download pdf Operating And Installation Instructions for Ventilation Hood Miele DA 1255. Miele DA 1255 48 pages.
Print Page
Installation
Installation recommendations
– To achieve optimum vapour
extraction, the cooker hood must be
positioned centrally over the hob, not
to the side.
– The hob should be no wider than the
cooker hood, and if possible, it
should be narrower.
– The installation area must be easily
accessible. The cooker hood should
be easily accessible and easy to
dismantle in the event that service is
required. This should be taken into
consideration when planning the
position of cupboards, shelves,
ceilings or features in the vicinity of
the cooker hood.
30
Protective foil
The housing components of stainless
steel models have protective foil around
them to protect them from transport
damage.
Please remove the grease filters from
the appliance and remove this foil
from the housing components and
the frames of the grease filters before
installing the cooker hood. The foil
can be peeled off easily.
Deflector
A deflector is installed in the rear of the
cooker hood. Its position depends on
operating mode. With extraction the air
is directed upwards and out of the
housing at the back. With recirculation
the opening is closed and the air is
directed forwards through the
recirculation grille.