Miele DA 206 Operating Instructions Manual - Page 25

Browse online or download pdf Operating Instructions Manual for Ventilation Hood Miele DA 206. Miele DA 206 36 pages. Cooker

Print Page

With a 6 mm Ø bit drill the 2 holes in

the wall and press the S6 plugs into

the holes.

Screw in the plate C with 2 screws

4 x 30 mm and 4.3 underlying

washers.

Vapour guide/canopy

Drill the following holes before fitting

the vapour guide (see the illustration in

the section on fitting the retaining

plates)

DA 206, DA 216, DA 217:

Drill a hole of 6 mm Ø in the middle

taking measurement w into account

and press an S6 plug into the hole.

DA 209, DA 219:

On the line of the middle hole drill 2

holes of 6 mm Ø 500 mm apart tak-

ing measurement w into account

and press S6 plugs into the holes.

To fit the vapour guide (canopy), the

grease filters and the lighting tubes

must be removed. (See section on

Cleaning and Care).

Hang the vapour guide (canopy) on

to the angle brackets of retaining

plate A.

Secure the vapour guide (canopy)

with 5 x 40 mm screws into each

drilled hole.

Installation