Miele DA 210 Operating Instructions Manual - Page 18

Browse online or download pdf Operating Instructions Manual for Ventilation Hood Miele DA 210. Miele DA 210 28 pages. Cooker

Print Page

Electrical connection and Technical data

Electrical connection

General notes

All electrical work should only be under-

taken by a suitably competent person

in strict accordance with national and

local safety regulations.

For extra safety it is advisable to install

a residual current device (RCD) with a

trip current of 30 mA.

Connection should be made by a

double pole fused spur connection unit

(only for GB).

WARNING:

THIS APPLIANCE MUST BE

EARTHED

The data plate gives the necessary

data for connection. This is visible

when the grease filter has been taken

out.

Check that these data correspond with

the voltage and frequency of the

on-site electricity supply.

Technical data

Rated load

– DA 200, DA 210, DA 220 . . . . . 340 W

– DA 200 EXT, DA 210 EXT,

DA 220 EXT . . . . . . . . . . max. 410 W

Lighting . . . . . . . . . . . . . . . . . . 4 x 20 W

Voltage (U.K., AUS). . . . . . . . . . . 240 V

Voltage (NZ) . . . . . . . . . . . . . . . . 230 V

Frequency . . . . . . . . . . . . . . . . ~ 50 Hz

Fuse rating (GB) . . . . . . . . . . . . . . 13 A

AUS, NZ:

Plug rating . . . . . . . . . . . . . . . . . . . 10 A

Test marks . . . . . . . . . . Electrical safety,

. . . . . . . . . . . . . C-Tick Mark

Electrically suppressed

according to . . . . . . . . . . AS/NZS 1044

Fan power

– Extraction system ø 150 mm:

Extraction power according to

DIN 44971

Air extraction . . . . . . . . . . . . . . 785 m

– External fan:

Extraction power (unimpeded flow) de-

pending on the type of fan connected.