Miele DA 220-3 Operating And Installation Instructions - Page 15

Browse online or download pdf Operating And Installation Instructions for Ventilation Hood Miele DA 220-3. Miele DA 220-3 32 pages. Ventilation system
Also for Miele DA 220-3: Operating And Installation Instructions (36 pages), Operating And Installation Instructions (32 pages), Operating And Installation Instructions (36 pages)

Print Page

The reusable metal grease filters

remove solid particles from the vented

kitchen air (grease, dust, etc).

The grease filters should be cleaned

every 3-4 weeks or whenever the

grease filter timer indicator lights.

A dirty filter is a fire hazard.

^ To remove the grease filters press the

locking clips in towards the middle of

the filter. Lower and remove the filter.

When handling the filter hold it firmly

to avoid damages of the filter and

the cooktop.

^ Clean the filters

use a scrub brush in

warm water with a mild detergent.

the lower basket, making sure that

the spray arm is not blocked.

Depending on the detergent,

cleaning the grease filters in a

dishwasher may cause permanent

discoloration of the filter surface.

Performance of the filter will not be

affected by this discoloration.

^ After cleaning, the filters can be

placed on a towel to air dry.

^ While the filters are removed, clean

any dirt or grease from the filter

casing to prevent the risk of fire.

When putting the grease filters back

make sure that the locking clips are

visible facing down towards the

cooking surface.

If the filters are incorrectly installed,

insert a small screwdriver into the slit

along its edge to disengage it from the

casing.

^ After returning the grease filters,

press the grease filter button for

3 seconds to reset the timer. The

indicator light will go out.

^ If the grease filters are cleaned

before the timer has reached its

maximum, the grease filter button

should be pressed for 6 seconds to

reset the counter to zero.

place the filters in