Miele DA 2390 Operating And Installation Instructions - Page 24

Browse online or download pdf Operating And Installation Instructions for Ventilation Hood Miele DA 2390. Miele DA 2390 36 pages. Ventilation system
Also for Miele DA 2390: Operating And Installation Instructions (40 pages), Operating And Installation Instructions (40 pages), Operating And Installation Instructions (40 pages), Operating And Installation Instructions (36 pages), Operating And Installation Instructions (36 pages)

Print Page
Miele DA 2390 Operating And Installation Instructions

Installation

Before installation

Before installation, it is important
to read the information contained in
this chapter and in the "IMPORTANT
SAFETY INSTRUCTIONS" chapter.
The ventilation hood is intended for
installation in wall cabinets, ventilation
housing units, vent flues or above
kitchen islands.
 Before installing, check to make sure
that the top of the appliance will be
accessible once it is installed.
If this is not the case, install the exhaust
ducting and prepare the electrical
connection before installation.
24

Installation materials

4 M5 x 40 mm screws, 4 washers,
4 M5 nuts for securing the ventilation
hood to an interim shelf
10 M4 x 8 mm screws to secure the
ventilation hood
4 M4 x 12 mm screws for additional
securing of the ventilation hood to
uneven surfaces
Conversion kit for recirculation
mode
including directional unit, hose, and
hose clips (not supplied, but available
as an optional accessory. See
"Technical data").