Miele DA 249-4 Operating And Installation Instructions - Page 33

Browse online or download pdf Operating And Installation Instructions for Ventilation Hood Miele DA 249-4. Miele DA 249-4 40 pages. Ventilation system
Also for Miele DA 249-4: Operating And Installation Instructions (40 pages), Operating And Installation Instructions (44 pages), Operating And Installation Instructions (40 pages)

Print Page

2 protective shields

prevent scratches to the chimney

during installation.

1 vent collar

for use with 6" (150 mm) exhaust

ducting

1 reducing collar

for use with 5" (125 mm) exhaust

ducting.

Upper retaining plate secures the

chimney extension.

Middle retaining plate for additional

stability of the chimney.

Lower retaining plate secures the

canopy and motor assembly.

Installation kit for recirculation

mode contains diverter, 2 grilles, a

hose and hose clips (optional

accessory)

CAUTION

To avoid risk of hand or other injury,

avoid contact with sharp edges

during the assembly and installation

process.

Installation instruction diagram

8 large headed screws 5 x 40 mm

for securing the retaining plates and the

canopy.

(S8 wall anchors included in the

packaging are not for use in USA / CDN.)

2 M 6 locking nuts for securing the

motor assembly.

2 screws 3.9 x 7.5 mm for securing the

chimney.

2 screws M4 with locking nuts and

plastic washers for securing the glass

canopy.

1 screw cover

1 lever for disassembling the chimney

Installation