Miele DA 249-4 Alu Operating And Installation Instructions - Page 27
Browse online or download pdf Operating And Installation Instructions for Ventilation Hood Miele DA 249-4 Alu. Miele DA 249-4 Alu 40 pages.
Also for Miele DA 249-4 Alu: Operating And Installation Instructions (44 pages)
Print Page
Changing a halogen lamp
^ Before any cleaning or maintenance
work, disconnect the rangehood from
the mains supply. Ensure that:
– it is switched off at the isolator, or
– it is switched off at the wall socket
and the plug is withdrawn, or
– the mains fuse is disconnected, or
– the screw-out fuse is removed (in
countries where this is applicable).
,
Exercise caution when changing
halogen lamps. They get very hot
during use and remain hot for some
time after being switched off. Let
them cool down before you change
them.
Cleaning and care
^ Remove the stainless steel outer filter
(see "Cleaning and care").
^ Pull the halogen lamp out of its
socket. Take care not to let the lamp
fall onto the cooktop below.
^ Insert the new halogen lamp into its
socket and carefully push into
position.
When replacing a defective lamp, it
is suggested that you use exactly
the same type of lamp (see
"Technical data" for lamp
specification).
27