Miele DA 2550 EXT Operating And Installation Instructions - Page 30
Browse online or download pdf Operating And Installation Instructions for Ventilation Hood Miele DA 2550 EXT. Miele DA 2550 EXT 48 pages.
Print PageCleaning and care
Changing a lamp
Use only the lamps specified for use
with this appliance.
Other lamps, e.g. halogen lamps,
may be damaged due to the high
generation of heat.
The lamps should be replaced with the
following:
Manufacturer ............................... EGLO
Lamp type .................................... GU10
Specification................................ 12981
Wattage ........................................... 3 W
ILCOS D Code...... DR-3-H-GU10-50/56
These lamps are available from Miele.
30
Switch off the fan and the lighting.
The lamps can get very hot when
in use.
Allow the lamps to cool down for a
few minutes before changing them.
Disconnect the rangehood from the
electricity supply before replacing the
lamps (see "Warning and Safety
instructions").
Insert the lever supplied into the gap
between the lamp and the lamp
holder.
The lamp will drop downwards.
Grip the lamp, turn it anti-clockwise
and take it out.
Screw the new lamp into the socket
and push it upwards. Please follow
the manufacturer's instructions.