Miele DA 289-4 Operating And Installation Instructions - Page 6
Browse online or download pdf Operating And Installation Instructions for Ventilation Hood Miele DA 289-4. Miele DA 289-4 36 pages. Cooker
Also for Miele DA 289-4: Install Manual (1 pages), Operating And Installation Manual (36 pages), Operating And Installation Manual (40 pages), Operating And Installation Instructions (36 pages)
Print Page
IMPORTANT SAFETY INSTRUCTIONS
Installation
~
, WARNING
To reduce the risk of fire only use
metal ductwork.
~
Provided a larger distance is not
given by the manufacturer of the
cooktop, follow the recommended
minimum safety distances between a
cooktop and the bottom of the grease
filter of 30" (762 mm).
See "Appliance Dimensions" for more
information on optimum installation
heights.
If local building codes require a greater
safety distance, follow their
requirement.
If there is more than one appliance
beneath the hood and they have
different minimum safety distances
always select the greater distance.
~
Be careful not to damage hidden
electrical wiring or plumbing when
cutting or drilling into the wall or ceiling.
~
Do not use an extension cord to
connect the appliance to electricity.
Extension cords do not guarantee the
required safety of the appliance,
(e.g. danger of overheating).
~
Do not install this hood over
cooktops burning solid fuel.
6
~
Any fittings, sealant, or materials
used to install the ductwork must be
made of approved non-flammable
materials.
~
Never connect an exhaust hood to
an active chimney, dryer vent, vent flue,
or room ventilating ductwork. Seek
professional advice before connecting
an exhaust hood vent to an existing,
inactive chimney or vent flue.
~
Ducted fans must always be vented
outdoors.
~
Make sure that the airflow in the
room is sufficient for combustion and
exhausting of all non-electric heating
appliances (water heaters, gas
cooktops, gas ovens, etc.), otherwise
backdrafts may occur. Follow the
heating manufacturer's guidelines and
safety standards or those published by
the National Fire Protection Association
(NFPA) or the American Society for
Heating, Refrigeration and Air
Conditioning Engineers (ASHRAE).
If in doubt, consult an experienced
professional.