Miele DA 3490 Operating And Installation Instructions - Page 36

Browse online or download pdf Operating And Installation Instructions for Ventilation Hood Miele DA 3490. Miele DA 3490 40 pages. Ventilation system
Also for Miele DA 3490: Operating And Installation Manual (40 pages), Operating And Installation Manual (40 pages), Installation Instructions Manual (24 pages)

Miele DA 3490 Operating And Installation Instructions

Electrical connection

All electrical work should be
undertaken by a suitably qualified
and competent person in strict
accordance with current national
and local safety regulations.
Installation, repairs and other work
by unqualified persons could be
dangerous, for which the
manufacturer cannot be held liable.
Ensure power is not supplied to the
appliance until after installation or
repair work has been carried out.
Do not connect the appliance to the
mains electricity supply by an
extension lead. These do not
guarantee the required safety of the
appliance.
The connection data is given on the
data plate. This is visible when the
grease filters have been removed.
Ensure that this data matches the
household mains supply.
Connection of this appliance should be
made via a suitable isolator which
complies with national and local safety
regulations and the On-Off switch
should be easily accessible after the
appliance has been built in.
36
If the switch is not accessible after
installation, an additional means of
disconnection must be provided for all
poles.
For extra safety, it is advisable to install
a suitable residual current device
(RCD). Contact a qualified electrician
for advice.
Important
This appliance is supplied for
connection to an AC 230 V single
phase 50 Hz supply.
The wires in the mains lead are
coloured in accordance with the
following code:
Green/yellow = earth
Blue
= neutral
Brown
= live
WARNING:
THIS APPLIANCE MUST BE
EARTHED
If the connection cable is damaged, it
must be replaced by the manufacturer
or similarly qualified persons to avoid a
hazard.