Miele DA 3560 Operating And Installation Instructions - Page 20

Browse online or download pdf Operating And Installation Instructions for Ventilation Hood Miele DA 3560. Miele DA 3560 44 pages. Cooker hood

Print Page

Cleaning and care

Cleaning the grease filters by hand

^ Clean the filters with a soft nylon

brush in a mild solution of hot water

and a little washing-up liquid.

Do not use "neat" washing-up liquid.

Avoid:

– cleaning agents containing

descaling agents,

– powder cleaners, cream cleaners or

abrasive all-purpose cleaners.

– oven sprays.

Cleaning the grease filters in the

dishwasher

^ Place the filters as upright as

possible in the lower basket, with the

short sides upright. Make sure that

the spray arm can move freely.

^ Select a programme with a maximum

temperature of 65° C. If a Miele

dishwasher is being used, select the

Sensor wash programme.

^ Use a mild dishwasher detergent.

Depending on the dishwasher

detergent used, cleaning the filters

in a dishwasher can cause

permanent discolouration to the

surface.

However, this will not affect the

functioning of the filters in any way.

^ After cleaning, leave the filters to dry

on an absorbent surface before

replacing them.

^ When removing the filters for

cleaning, also clean off any residues

of oil or fat from the now accessible

housing to prevent the risk of these

catching fire.

^ Push the grease filters back into

position.

Resetting the grease filter operating

hours counter

After cleaning, the operating hours

counter needs to be reset.

^ Whilst the fan is switched on, press

the operating hours button [ for

approx. 3 seconds until only the 1 is

flashing.

The Grease filter symbol [ goes out.

If you want to clean the grease filters

before the operating hours counter has

reached its maximum:

^ Press the operating hours button [

for approx. 6 seconds until only the 1

is flashing.