Miele DA 403 Operating And Installation Instructions - Page 12

Browse online or download pdf Operating And Installation Instructions for Ventilation Hood Miele DA 403. Miele DA 403 36 pages. Ventilation system
Also for Miele DA 403: Operating And Installation Instructions (32 pages), Product Dimensions (2 pages), Install Manual (2 pages), Operating And Installation Manual (36 pages), Operating And Installation Instructions (32 pages), Operating And Installation Instructions (36 pages)

Print Page
Miele DA 403 Operating And Installation Instructions
^ Press the On/Off touch control.
The fan runs at power level "II".
The indicator lamp will come on.
If the cooker hood has been
connected to a window contact
switch via the Miele Control module
DSM 400 then the fan cannot be
switched on if the window is shut.
The indicator lamp will flash.
^ Use the " / " touch controls to
select the power level required.
" " touch control = higher setting
" " touch control = lower setting
Depending on the intensity of the
cooking vapours, levels "I" to "III" (green
indicator lamps) are usually sufficient
for normal cooking.
When frying or cooking food with a
strong aroma, you may wish to select
the Intensive setting (yellow indicator
lamp) for a short period.
12
You can set the Intensive setting so that
it only runs for 10 minutes before
reverting automatically to level III.
^ To set this option both the fan and the
hob lighting must be switched off.
^ Press the run-on option touch control
for approx. 10 seconds. The first fan
setting indicator will light up.
^ Then press, one after the other,
- the hob lighting touch control
- the " " touch control and
- the hob lighting touch control again.