Miele DA 9091 W Operating And Installation Instructions - Page 20

Browse online or download pdf Operating And Installation Instructions for Ventilation Hood Miele DA 9091 W. Miele DA 9091 W 32 pages.

Print Page

Cleaning and care

 To take out a grease filter, release the

locking clip on the filter, lower the

filter approx. 45°, unhook it at the

back and remove it.

Cleaning the grease filters by hand

 Clean the filters with a soft nylon

brush in a mild solution of hot water

and a small amount of washing-up

liquid. Do not use "neat" washing up

liquid.

Unsuitable cleaning agents

Unsuitable cleaning agents can cause

damage to the surface of the filters if

used regularly.

Do not use:

- cleaning agents containing descaling

agents

- powder cleaners, cream cleaners

- aggressive multi-purpose cleaning

agents or spray cleaners for grease

- oven sprays

Cleaning the grease filters in the

dishwasher

 Place the grease filters upright or

slightly inclined in the lower basket.

Ensure the spray arm is not

obstructed.

 Use a commercially available

household dishwasher detergent.

 Select a dishwasher programme with

a wash temperature between 50 °C

and 65 °C.

Depending on the detergent used,

cleaning the filters in a dishwasher

may cause the inside filter surfaces to

become discoloured. This will not

affect the functioning of the grease

filters in any way.

After cleaning

 After cleaning, leave the filters to dry

on an absorbent surface before

replacing them.

 When removing the filters for

cleaning, also clean off any residues

of oil or fat from the now accessible

housing to prevent the risk of these

catching fire.

 Replace the grease filters, making

sure that the locking clips are facing

down towards the hob.

 If a grease filter is inadvertently

replaced upside down, insert a small

screwdriver blade into the slit to

disengage the clip.