Miele DA2280 Operating And Installation Instructions - Page 30
Browse online or download pdf Operating And Installation Instructions for Ventilation Hood Miele DA2280. Miele DA2280 36 pages. Ventilation system
Also for Miele DA2280: Dimensions (1 pages), Operating And Installation Manual (40 pages), Operating And Installation Instruction (40 pages), Installation Instructions Manual (19 pages), Operating And Installation Instructions (44 pages)
Print Page
Installation
Recirculation mode
If site conditions are not suitable for the
hood to be used for air extraction, the
appliance must be converted for
recirculation using the following
installation kit. It can be ordered from
your Miele dealer or the Technical
Service Dept.
It contains a 6" (150 mm) diameter
hose, a grille and a hose clamp to
secure the hose at the exhaust
connection of the hood.
DA 2280 installation needs
one installation kit and two active
charcoal filters
DA 2210 installation needs
two installation kits and four active
charcoal filters
A non-return flap is not needed in
recirculation mode.
30
^ Install the installation kit according to
the installation situation.
When installing the recirculation
vents make sure that the slats point
towards the center of the room and
not to a wall or the ceiling.
^ Install the active charcoal filters (see
"Cleaning and Care") and reprogram
the charcoal filter timer.