Miele DA2280 Operating And Installation Manual - Page 11
Browse online or download pdf Operating And Installation Manual for Ventilation Hood Miele DA2280. Miele DA2280 40 pages. Ventilation system
Also for Miele DA2280: Operating And Installation Instructions (36 pages), Dimensions (1 pages), Operating And Installation Instruction (40 pages), Installation Instructions Manual (19 pages), Operating And Installation Instructions (44 pages)
Print Page
Automatically switching back the
intensive power level
The intensive level can be programmed
to automatically switch back to level 3
after 10 minutes.
^ To set this option, the fan and the
overhead lighting must be turned off
and the fume deflector pushed in.
^ Press and hold the "–" and "+" buttons
for approx. 10 seconds until power
level indicator 1 lights up.
^ Then press the following buttons one
after another :
– overhead lighting I,
– the "–" button, and
– overhead lighting I again,
If the indicators 1 and IS flash, the
automatic switch back is not activated.
^ To activate the automatic switch
back, press the "+" button.
The power level indicators 1 and IS
light continuously.
To deactivate, press the "–" button.
^ Press the On/Off button K to confirm.
^ If the procedure is not stored within 4
minutes, the hood will automatically
default to the "old" data.
Automatic Safety Shut-Off
If the ventilation system is left on, the
fan will turn automatically off 10 hours
after the last button was activated. The
lighting however will remain on.
^ Press the On/Off button K to turn the
fan back on again.
Operation
11